Grandtec Grand Ip Camera Pro Driver

if you have a grandtec ip camera and you want to use the camera remotely – thread link your camera to your computer. you can wire the cam up to your computer via a serial port. to do this you will need a serial cable that has a 3.3v serial port on one end and a 3.3v ttl serial port on the other.

i have the same problem. the serial port on my camera worked perfectly. i am using the latest firmware from january 2012 and the newest version of ispy. you can wire the cam up to your computer via a serial port. to do this you will need a serial cable that has a 3.3v serial port on one end and a 3.3v ttl serial port on the other.

ip camera viewer does not use the camera driver, but rather uses v4l2 which is an open source driver developed by the linux community. if the camera’s driver does not report itself to ip camera viewer, it is likely that there is a problem with the camera itself.

ip camera viewer runs in the background, and keeps an eye on your home, office, parking area, or anywhere you have an ip camera. view video from multiple cameras simultaneously. more than 1800 different ip camera models are supported including axis, canon, cisco, d-link, foscam, linksys, mobotix, panasonic, pixord, sony, toshiba, and vivotek. virtually all usb cameras work with ip camera viewer.

ip camera viewer is a free video surveillance application that uses video4linux2 to view video streams from ip cameras and other video sources. it can be used as a standalone application or as a network camera viewer for x and gnome desktop environments. it allows one to view, record, and playback video captured by ip cameras, video sources such as vcr, dvb-s, and dvb-t (dvb-t2 is currently unsupported). the program can also be used to detect motion in a video stream and trigger email alerts when motion is detected.

i’m not sure if this applies to the model i’m using, but i couldn’t use the ip from my dsl router. so, i had to use the grand ip camera pro with dhcp and ups enabled on my modem. if you don’t have a dhcp server, then set the grand ip camera pro to static ip.
1. menu: you will find this menu on the left side of the main screen of the camera viewer. 2. system: this is the same as the main screen of the camera viewer. 3. play: you will find this on the right side of the main screen of the camera viewer. 4. find: you will find this on the bottom of the main screen of the camera viewer. 5. help: you will find this on the top of the main screen of the camera viewer.
twc-c3a is a wireless security camera. the system supports both ethernet (ip) and wireless (802.11) wireless network connection. the system supports the following 2.4 ghz and 5 ghz wireless network connection: 802.11 b/g/n, wifi, wifi direct, and more. if you want to use the ethernet ip cable to connect the camera, you will need to connect the camera to the computer with a normal ethernet cable. you can set the camera to use either the ip address or the dhcp address to connect to the camera. you can also set the camera to use the wireless ip address to connect to the camera.
5ec8ef588b

By, darckamm

Grandtec Grand Ip Camera Pro Driver

Add Comment Cancel reply

Recent Posts

Grandtec Grand Ip Camera Pro Driver

Add Comment Cancel reply

Recent Posts

Sign In Telegram Top List

Reset Your Password